They loved them, but didn’t understand that stupid keychain thing. And removed it so they could play with the figures.

Leaving me with all these:

To make a long story short: I had a small bag of keys from an old Grass Valley image switcher lying in my drawer. And got an idea. Dremel-time:

And ta-daaa:

Of course the keys regarding chroma keying are extra cool as keychains:

…and if you don’t have such keys you can use keys from another keyboard or something else entirely:

So there you are. Trendy and environmentally friendly use of old junk.

But our new Wilfa BM-25s had one huge design flaw. To indicate the point where you can add extra ingredients in the baking cycle the Wilfa engineers found it appropriate to use a screaming loud beeper. Beeping 20 times or something. Even when placing the machine far away from where we sleep it woke us up during the night. And, it’s not possible to turn it off.

So I decided the Wilfa needed some circuit bending. Yeah, voiding the warranty.

Fortunately it was very easy to open. And I could see the beeper right away. I did some tests and ended up using a 1.8 kohm resistor to decrease the audio level. Making the machine going from screaming loud to a subtle beep.

The only thing you have to do is to locate the beeper, use a soldering iron to remove it and place the resistor on one of the pins.

And here’s the result.

Using a resistance to lower audio from Eirik Solheim on Vimeo.

The video simply shows the result. I short cut the resistor with a pair of pliers to show the original audio and remove it to show the very subtle and low audio after the resistor was added.

You can use the same method on most annoying toys and devices.

Warning:
Messing with high voltage equipment can be dangerous. And messing with equipment in general will void the warranty and you can end up destroying it. I take no responsibility if you destroy your equipment or yourself…

I have never bothered to protect my iPod with loads of covers and stuff. I have the device because I want to use it and it is just too much of a hassle if I have to remove covers and stuff from the iPod every time I want to dock it in the car or at home.

So it ends up with a lot of scratches. No big deal. They’re very visible in certain kinds of light but not really a problem when using the iPod. Still, when I found a product called Displex Display Polish in my local gadget store I just had to try it out on my seriously damaged iPod.

The process is simple. Cover the parts that you don’t want to polish. Add some white polishing paste and start polishing.

Before

After

As you can see. The stuff did not remove all scratches, but my iPod is absolutely better! If I spent the evening polishing I guess I would get an even better result. You can get the display polish on Amazon, or if you happen to live in Norway your best friend would (as always) be Clas Ohlson.

This time I did. After carrying this coffee in my backpack around Kommodo, Lombok and Bali we travelled home and I could start experimenting.

Because you are intelligent enough to read this blog you will not have to experiment when you get hold of some green beans. Recently my good colleague Astrid returned from Cuba with some very good green beans. She was kind enough to give some of it to me! When roasting them today I took some nice pictures and made these simple guidelines:

1. Turn off your fire alarm / smoke detector
2. Preheat your electric oven to 250 degrees celcius (482 F)
3. Spread the beans in an even layer on a plate only one bean deep
4. Roast the coffee for 15 – 25 minutes

The beans will start turning golden and swell, after about 10 minutes they will start making a popping sound as the inner part of the bean transform during roasting. When you open the oven after about 15 minutes to check on the beans it will smoke heavily. Turning off the smoke detector is no joke!

During the last minutes you have to check on the beans regularly. Use a flashlight if necessary. Depending on your taste, you can roast the beans all the way to the darkest italian roast. At this stage the beans turn slightly glossy because some of the essential oils in the bean leaks out to the surface.

When finished take the beans out and cool them as fast as possible. If I do this during winter I put them outside. Transfering them to a cool plate is also good.

When they have cooled down you can remove as much of the chaff as possible. The chaff is parts of the inner skin on the bean. You don’t have to remove all of it, but by tossing the beans around in a colander you will get rid of most of it.

Store the beans in an air tight container. Grind only minutes before you are going to brew your coffee. Now you can enjoy the freshest coffee you have ever tasted. If you decide to make espresso you will experiense an insane amount of crema.

And yes, something like Pantone Colour 470M or 730M on the crema is an indication of a good espresso.

If you want to take it a step further these are some resources: Sweetmarias, Ongebrand, Coffeegeek

And you can support eirikso.com if you decide to buy the same book that I am using as my detailed guide through this link: Home Coffee Roasting

When connecting my QPVision 37″ LCD to my media center through DVI I had no problems running the native resolution of 1366×768 on the screen. This gave me one-to-one pixel mapping and a completely sharp picture.

However, my friend Staale ran into some problems that seem to be quite common. He did some tests and created a simple and very effective test pattern that can help you find the right resolution.

It seems like quite a bit of LCD screens that has a resolution of 1366×768 report to the screen cards that the correct resolution is 1360×768. Seems like a small difference, but when you run 1360×768 on a screen that actually is 1366×768 the screen sometimes does a bit of scaling that makes parts of the picture slightly unfocused.

Here is an example. The first picture is taken as a super close up of the screen in 1360×768. The next one is the same area on the same screen forced to 1366×768 through the advanced settings in the screen card driver:

And here is a detail of those images:

The difference seems big here, but it can be difficult to detect and that is where Staale’s brilliant test pattern comes in. It is a simple grid of black and white pixels that will clearly reveal a screen that is not mapped one-to-one. You can download the image here:

GIF (3 k)
PNG (4 k)
BMP (1,2 MB)

It should never be converted to a JPG. Any lossy compression will destroy the file.

Download it and insert it as your desktop pattern. Centered and not streched.

If your screen looks like this:

…then you have a perfect one-to-one pixel mapping.

If it looks like this:

…then you have a problem with your pixel mapping.

Unfortunately it can be difficult to solve the problem. It depends on the screen, your screen card, the firmware in the screen, your screen card drivers, the software you use etc… It involves advanced tools and might even put you into serious trouble with your screen and the image from your computer.

For relatively new Nvidia screen cards and drivers you have options to take complete control of the refresh rates and resolution to the screen. You can also try playing around with PowerStrip. Or, use AVS Forum. An excellent source of information on advanced use of media equipment.

Digg this story here.

And please feel free to comment if you have solutions to this problem for specific setups.

I made one of these two years ago, and as the picture indicates. I need one more. Of course I didn’t find my original drawing and had to use the old one as a basis for my measures. Now I am posting this here for future reference.

The tools

What you need

2 wooden plates of 40 x 40 cm
2 wooden plates of 60 x 40 cm
8 angle backets

I used two plates of 120 x 40 cm. One cut in two parts and one cut in three parts.

The measures

Download a PDF for nice printing here. Yeah. I know. Not much of a technical drawing and no numbers for people in countries that are using an ancient form of measuring. But, it’s better than nothing and should be just fine for what you need to know. Use this calculator if you want to convert from centimeters to inches.

Measure out the details from my drawing on both the 60 x 40 plates. Important: one needs to be a mirror of the other one.

Mount the 40 x 40 plates on one of the 60 x 40 plates using the angle brackets. Mount the last 60 x 60 plate and you are done.

It’s ready!

Now you can add a lick of paint. And something comfy to make it soft.

I have also added wheels to make it easier for the kids to move it around. No detailed drawings, but you intelligent people manage to make something out of these pictures…?

Update:

The wheels

I understand that the part about the wheels is not much of a tutorial. And there is a mysterious piece of wood in there that is mentioned in the drawing and clearly visible in the pictures of the wheels but not mentioned in the inventory list. The plate that is used to mount the back wheels.

It is a plate that is 40 x 12 cm. It is mounted with the same type of angle brackets that is used on the rest of the chair. Depending on the size of the wheels you intend to use you mount it like indicated in the drawing or adjust a bit up or down.

I have used a set of completely rotating wheels that can be locked if you want the chair to stay in one position.

Absolutely low moral commercial stuff

You can support eirikso.com by buying a book or two:

Thanks to Oyvind I have just installed Mint on my server. This gives me very nice statistics from my site. It runs locally and stores the data in a mySQL database on my server. It works in realtime and shows statistics as people browse your site.

One very nice feature is that Mint supports Peppers. Peppers are plugins made by all kinds of very cool people.

Some good peppers:
Referrer Rollup
Gives you a very nice and tidy list of all your referrers

xxx Strong Mint
Show the IP of your visitors

Sparks!
Sparks! visualizes your visitor data.

Adsense Click Pepper
Get valuable info on how people click on your adsense ads

Foreign Pepper
Show where your visitors are coming from

Feedburner Stats Pepper
Show stats and circulation from your Feedburner RSS-feed

Fresh View Pepper
Fresh View uses XML-based SVG to visualize your Mint visitor data.

Google Images Pepper
Tracks hits from Google Images and let you know about the most popular images on your site. This one is supposed to be replaced by the Referrer Filter pepper, but that one did not work on my first install – so I kept the Google Images pepper.

Trends
Trends analyzes your website’s usage over a set period of time.

Some of the Windows Media Center remotes has the ability to control other hardware in addition to the Media Center. The most common one is the one in this picture. On that one you can program the “TV”-button and the Volume-button. Most likely you would want to control the ON/OFF-function on your TV and the volume on your amplifier.

This is how you do it (from the MCE Remote Manual):

Update:
Link to the manual (PDF).

- By default, the VOL + and VOL – buttons on the remote control for Media Center PC control the system volume on your computer, and the TV button has no command assigned to it until it “learns” one.

- Do not perform this procedure in bright natural or artificial light.

To program buttons on the remote control by using the learning feature
1 Place the remote control for Media Center PC head to head (2 to 3 inches apart) with the remote control from which it is learning.

2 On the remote control for Media Center PC, press and hold the DVD MENU and OK buttons at the same time until the remote control lights turn off (2 seconds). The remote is now in learning setup mode.

3 On the remote control for Media Center PC, press and release the TV, VOL +, or VOL – button, depending on which command you want it to learn. The remote control for Media Center PC lights blink once to confirm the selection.

4 On the remote control that is teaching the command, press and hold the button that you want the corresponding button on the remote control for Media Center PC to learn.

The remote control for Media Center PC lights blink twice to confirm the selection. If the remote did not learn the command, the lights blink quickly four times. To try again, repeat steps 1 through 4.

5 Repeat steps 1 through 4 for the other buttons that can learn commands.

To restore the default remote control settings
1 Press and hold the DVD MENU button and LEFT navigation button at the same time until the remote control for Media Center PC lights turn off.

2 Press the OK button.

The remote control for Media Center PC lights blink twice to confirm that the buttons have been reset. The TV button will have no command assigned to it and the VOL + and VOL – buttons will adjust the Media Center PC system volume. If the default settings were not restored, the lights blink quickly four times. To try again, repeat steps 1 and 2.

I am syncing my podcasts onto my mobile. I have found the perfect software MP3-player. The final step in my quest to make a good device for podcast listening out of my Nokia 6630. I am now modifying my Nokia Handsfree set to accept standard headphones. All I have to do is to open the little box containing the mic and mount a standard minijack connector.

By doing it that way I will keep both the mic and the button that lets you answer calls.

Note
All the pictures in this guide can be clicked to give you a closer look. And, for readers in countries with stupid legal systems I will have to mention that I do not take any responsibility for you destroying your new hansdfee while trying to apply what I have described here. That said, if you have ever laid your hands on a soldering iron, this is as easy as drinking a good dry martini.

Ericsson
This guide was inspired by this post in the HowardForums. If you have an Ericsson headset that post will help you out.

Let’s start

Use a small screwdriver to open the cover. On my headset it was tightened with a small amount of glue. It was no problem to carefully open it without destroying it.

Open it carefully. You will clearly see the mic and the switch. The interesting stuff is on the back of the board. Flip it back carefully from the top.

Now you can see where the headphones are connected. The four cables are connected to points clearly marked: L+, L-, R+ and R-.

Pick up your soldering iron and remove the old headphones.

I used an extension cable for headsets that also featured a volume control with a small clip so that I can clip the device onto my jacket. This will let the mic be placed in a useful position as well. The pin layout for a minijack is: tip=left, ring=right, sleve=ground. You can of course use any female minijack. Just make sure you know what cables is left, right and ground.

I made a hole in the plastic to be able to insert the new cable. Solder the cable connected to the tip contact point to the place on the board marked L+, the cable connected to the ring to R+ and the ground cable to one of the negative connections, left or right. Here you can see that I have used L+, R+ and only L- for the ground connection.

Depending on what kind of cable there is on your new connection you might want to throw in a drop of glue at the spot where it leaves the box. You want it to sit tight so this baby will last through all the extreme sports you do while listening to the Engadget podcast on your mobile.. You might also want to use some drops of glue on the case itself.

It will clip nicely back together, but you know – that 360 mute grab on your new pair of skis might put some strain on your equipment…

Now I can connect my Creative Travelsound to transform my Nokia into a ghettoblaster. I can connect my Sony noise cancelling earbuds and I can even borrow my wife’s PortaPro and look cool in the park. Or, how about using an FM SoundFeeder to listen to whatever I want to from my mobile in my car?

The mic still works fine, and when using the phone as a …phone, all the people I talk to sound great as well!

Quite often I get a stupid message on my Nokia 6630 telling me that there is not enough memory and that I should close some programs. With no task manager and no simple way to know what programs are running this is a very annoying message! But, there actually is a very fast and simple way to close all programs. Simply open the memory card cover and close it again. As you might have noticed the Nokia actually closes all programs when you do that (to prevent loss of data if you remove the card).