Recently, I bought a new screen card to be able to run Win MCE 2005. I went for an XFX GeForce 6600 GT AGP. Mainly because the GeForce 6600 GT supports NVidia PureVideo and because the XFX Card had two DVI connectors.
I knew that I had to remove the original fan and mount something more silent, so at the same time I ordered a Zalman VF700 Cu.
I followed the instructions and the VF700 is quite simple to install. However, I encountered one problem on my particular card. The instructions tell you to mount the RAM heatsinks, then mount the GPU heatsink. Well, guess what – the RAM chips are too close to the GPU on this card, so the GPU heatsink will not fit if you mount the RAM heatsinks. It is close to impossible to remove the RAM heatsinks when they are properly in place.
A couple of minutes with some cutting pliers, and the problem was solved. You can see the result in the pictures.
After the modification everything went smooth. From a very noisy card to a dead silent one and a 10 degrees lower GPU temp!
Just thought it could be interesting for people to read this if they plan to buy the same combination.